How to Clean the Enamel Glass-Ceramic Door of a Real Fire Fireplace

1. Make sure the real fire fireplace glass has cooled. Do not clean the glass immediately after using the fireplace. After turning off a real fire fireplace, allow the glass to cool naturally before cleaning, as this will give the best results.

2. Open the real fire fireplace door. Note that the method of cleaning glass with ash is only suitable for real wood burning fireplaces, as it requires leftover ash from the fuel, and real gas fireplaces do not produce ash. Open the glass door to get access to the dusty glass surface.

3. Mix white vinegar and warm water in a ratio of 1:1. Regular water can be used if it is a hassle, but adding white vinegar will help break down the carbon residues of soot on the heat-resistant enamel glass-ceramics used in real fireplace fireplaces. Adding the mixture to a spray bottle makes it easier to apply, and this homemade cleaner can be used for other furniture too.

4. Spray the solution on a paper towel or clean cloth. It doesn't need to be fully soaked, just moisten with the solution.

5. If you have a gas fireplace installed in your home, you must first ensure that the gas valve is turned to the "off" position before starting to clean the gas fireplace. If you leave the gas running, it could cause a gas leak, which is dangerous.

The gas valve is usually located on the wall next to the fireplace.

Wait a few minutes for all the gas in the fireplace pipes to dissipate.

You also need to wait until all the gas fireplace components have cooled down before starting the cleaning process.

6. Dip the cloth into the ash. Find some fine-grained ashes in a real fire fireplace and stick the ashes with a cloth so that a thin layer of ash forms on the damp parts. Make sure you only get fine ash and nothing else. Because anything harder than fine ash will scratch the glass.

7. Scrub the real fire fireplace glass with soot attached. Fine ash is the perfect small particle material to remove carbon residue from the glass of real fire wood burning fireplaces. Wipe in circular motions, but don't worry about using too much force. If you can't remove it all at once, you can dip the towel in the ash several times.

Soot adhering to the glass and ash from the towel will mix to form a paste.

If there is a large piece of residue stuck to the glass that is hard to move, use a blade to break it up. Be careful to touch the residue with the blade, not the glass. Otherwise, you may scratch the glass.

8. Wipe off the paste. Use a new paper towel to wipe off the soot from the heat-resistant enamel glass-ceramic used in the fireplace.