How to use real fire fireplace and matters needing attention
Jun 20, 2022
1. The firewood used for the fire of the wood-burning fireplace should be dry, low in density and small in size, so that it is easier to ignite. We recommend solid alcohol that is easy to buy in the market as the medium for ignition, and use 3-5 pieces for each ignition. Concentrate on the bottom middle of the hearth and place the firewood directly on it. When placing firewood, try to use smaller and lighter ones near the alcohol block below, and use larger wood blocks as appropriate.
2. First adjust the intake air of the fireplace to the maximum position. Generally, the intake control valve of the fireplace is below the furnace door, one on the left and one on the left, and adjust to the maximum according to the direction of the arrow.
3. Take a piece of paper, clench it into a ball, ignite it with a lighter, place it directly near the alcohol, and slowly close the furnace door. After the alcohol is ignited, it will slowly ignite the wood... After about 5 minutes, the wood will be fully ignited , the flame is brighter and more beautiful, and the heat wave can be slowly felt in front of the glass door.
4. The Seguin fireplace is equipped with an advanced secondary combustion system, and the back-type air intake makes the combustion more sufficient. During normal combustion, there is basically no smoke and dust visible to the naked eye. The automatic air curtain technology makes the furnace door glass always clear and transparent, which greatly increases the ornamental value of the wood-burning fireplace.
5. Lean on the sofa, make a strong cup of coffee, and enjoy the warmth and unparalleled comfort brought by the fireplace......
6. About 40-60 minutes, the flame in the furnace will gradually become smaller, and the wood will slowly burn out. It is time to add wood. At this time, the temperature of the furnace door and furnace body will be very high, please be sure to use both hands Put on the special gloves for the fireplace to operate it later, lift the handle on the furnace door, gently open the furnace door, slowly put one or several pieces of wood into the furnace, try to get as close to the back of the furnace as possible, and slowly close the furnace door.
